Overview and Specifications:
Accessory Type : Extension Board
Compatible With : MCU, ARM, raspberry PI, Arduino
100% brand new and high quality
The output voltage can be adjusted to 5v / 8v / 9v / 12v, the default is 12v.
Input voltage range: 2.5v-5vout. The input voltage must be less than the set output voltage.
Output capacity: when inputiing 3.7v lithium battery, it can output 5v1a, 8v0.5a, 9v0.45a, 12v0.3a.
When entering in 5v, 8v0.7a, 9v0.7a, 12v0.5a can be output.
When the standard 12v output, the led indicator consumes about 1ma.
If the indicator is off, the input current is <1ma with no load.
Description voltage setting:
The front side of the PCB can be seen with the words a and b. Use the soldering iron to change the passage of the pad next to the charater.
The output voltage can be cahnged by breaking. In the following table, 0 indicates that the pad is disconnected and 1 indicates that the pad is connected.
The pad next to the led indicator can also be turned off to turn the indicator off.
0 0 5V
0 1 8V
1 0 9V
1 1 12V
Color: as the pictures shown.
Size: approx. 22x11mm (0.87×0.43in)
Material: Electronic component
Quantity: 1 pc
Transition: 1cm = 10mm = 0.39 inches
With retail package.
Please allow 1-3cm error due to manual measurement. Make sure you don’t mind before making an offer.
Due to the difference between different monitors, the image may not reflect the actual color of the item. Thank you!